Not much left to do while waiting on the aluminum frame members with Frank Glatzl for hole drilling.
Cleaned out the transmission fins on my Bolens 1455 tractor with FEL this afternoon. They were plugged up with mud and debris so that could have caused transmission overheating. Also have to replace an O-ring on the transaxle due to leakage of ATF past it but will do that later.
Got my second gas air blower back with a fuel line installed in it. But the fellow who fixed it up couldn't get it to run because he needs a special tool to adjust the idle. So I went on the internet, found the tool and ordered it. Will see if it is the right tool and then hope the tech can get the blower to work.
No comments:
Post a Comment